V2000-C Terminal Block ------------------------------------------------ +12V → Power supply positive GND → Power supply negative (common ground) NO → Normally open (to lock’s positive unlock wire) COM → Common (to lock’s negative / power supply GND) NC → Normally closed (rarely used with fail-secure locks) PUSH → Exit button (one side; other side to GND) SEN → Door contact sensor (to GND when door closed) ALARM → Optional alarm output BELL → Optional buzzer output
Connect the positive wire of the lock to NC , the negative wire of the lock to GND , and bridge COM to +12V . When power is lost, the lock opens.
Use the provided mounting template to fix the metal casing to the wall or door frame, usually at a height of 1.2–1.5 meters. Wiring: The uses a standard wire harness. Red: +12V DC Black: GND V2000-c Rfid Access Control User Manual
The system is a popular, standalone security solution designed for small to medium-sized businesses, residential complexes, and secure storage areas. This guide serves as a comprehensive manual to help you install, program, and maintain your device. 1. Introduction & Specifications
Power on the unit while continuing to hold the button/jumper for 3 to 5 seconds. Wiring: The uses a standard wire harness
Proper installation is crucial for the stability of the system.
Press 4 ➡️ 2 ➡️ # 7. Troubleshooting and Factory Reset Issue: The keypad does not power up or light up. and maintain your device.
The V2000-C RFID access control system is a reliable and effective solution for securing access to a premises or specific area. By following the user manual and configuration guide, administrators can ensure optimal performance and security. Regular maintenance and troubleshooting can help prevent system downtime and ensure smooth operation.