 |
 |
 |
 |
 |
 |
Ensure you have the authentic module and any included mounting screws or foam tape.
Whether your UI-7 unit is a board or a pulled/used unit? icom ui7 am fm unit install
Re-install the and four (4) rear screws . Post-Installation Check Connect the power supply, antenna, and microphone. Turn the transceiver on. Ensure you have the authentic module and any
Take photos of your wiring before closing the console. Upload them to your boat’s maintenance log. When something fails (years from now), those photos will save hours of tracing. Upload them to your boat’s maintenance log
Installation of the UI-7 typically occurs on the main or RF board. Accessing these boards requires removing the top and bottom chassis covers by extracting the designated Phillips-head screws. Once the covers are removed, the installation area for option units is generally identifiable by pin headers or a silk-screened outline on the motherboard. Mounting the UI-7 Module
Ensure you have the authentic module and any included mounting screws or foam tape.
Whether your UI-7 unit is a board or a pulled/used unit?
Re-install the and four (4) rear screws . Post-Installation Check Connect the power supply, antenna, and microphone. Turn the transceiver on.
Take photos of your wiring before closing the console. Upload them to your boat’s maintenance log. When something fails (years from now), those photos will save hours of tracing.
Installation of the UI-7 typically occurs on the main or RF board. Accessing these boards requires removing the top and bottom chassis covers by extracting the designated Phillips-head screws. Once the covers are removed, the installation area for option units is generally identifiable by pin headers or a silk-screened outline on the motherboard. Mounting the UI-7 Module
|
|
|
|
|
|