Thyssenkrupp Levant Stair Lift Installation Manual __full__ 🌟

Specifically metric sizes for assembling the rail segments and chair chassis.

Based on the installation manual, the following recommendations are made:

I can provide specific adjustments or electrical wiring schematics based on your answers. Share public link

If your installation requires a multi-piece rail, assemble it on the floor first. thyssenkrupp levant stair lift installation manual

If wireless call and send stations are installed, the engineer will demonstrate how to bring the lift to the desired floor. 5. Maintenance and Safety

The core drive module housing the dual 12V batteries, main circuit board, and drive motor.

Adjust the vertical leg heights of each bracket so the rail maintains a uniform distance from the wall and stays perfectly straight. Once leveled, drill pilot holes into the stair treads. Secure the brackets permanently using heavy-duty wood lag screws or concrete anchors. 4. Mounting the Drive Carriage and Seat Specifically metric sizes for assembling the rail segments

A frequently reported issue involves the gear wheel colliding with the rack and failing to rotate, preventing the chair from entering the guide.

Position the rail at the correct distance from the wall (typically 5 to 7 inches, depending on the staircase configuration). Use a level to ensure the rail is straight and not bowing.

The motorized carriage unit housing the motor, gearbox, and main circuit board. If wireless call and send stations are installed,

Locate a standard 220/240V wall socket near the top or bottom for the transformer.

Splice plates, pins, and high-tensile bolts.