Ultra Drone X14.0 Assault Manual -

Match the markings on the propellers with the corresponding motors (A or B). Place the propeller onto the motor shaft.

: Point the nose of the drone directly at the ground and spin it 360 degrees vertically.

Toggle the Flight Mode switch rapidly back and forth five times until the rear drone LEDs turn solid yellow. ultra drone x14.0 assault manual

A: This likely indicates a calibration or propeller issue. First, perform the calibration stick movement mentioned earlier. If the drone spins or drifts immediately upon takeoff, the propellers may be installed incorrectly. Ensure the marked "A" propellers are on the "A" designated motors (usually front-left and back-right).

The environmental conditions, such as .

To establish a connection between your remote and the drone:

(with integrated camera system) 2.4GHz / 5.8GHz Dual-Band Tactical Controller 14.8V 4500mAh LiPo Smart Batteries (x2) High-Efficiency Balance Charger and Power Cable Match the markings on the propellers with the

The Ultra Drone X14.0 Assault is advertised with an . To use it:

: For safety, maintain a horizontal distance from people equal to your flight altitude (e.g., stay 5 meters away if flying 5 meters high). Toggle the Flight Mode switch rapidly back and

: Dual-optical obstacle avoidance cameras located below the nose.