Charger Ac-60cr Manual: Autocraft Battery

Features a rugged steel cabinet, an impact-resistant handle, and heavy-duty wheels for easy transport across garage floors. Understanding the Control Panel

: Keep the charger in a dry area. Wipe the clamps after use to prevent corrosion.

Note: If the battery is installed in a vehicle, connect the negative clip to the chassis, away from the battery, to reduce sparking. Connect the AC cord to the wall outlet. 3.3 Charging Procedure The charger will automatically detect the battery voltage. autocraft battery charger ac-60cr manual

: Plug the charger into a grounded 120V AC outlet.

Never smoke or allow an open flame or spark near the battery or engine. Features a rugged steel cabinet, an impact-resistant handle,

: This charger will continue to charge even after the battery is full. Overcharging can lead to battery explosions or acid leaks.

Continue charging at a lower rate (like 35A) and watch the meter. If it doesn't drop after an hour, the battery is likely dead and must be replaced. Note: If the battery is installed in a

Do not leave a charging battery completely unattended for extended periods. Overcharging can damage the battery. When the charging process is complete, always turn off the charger and unplug it from the power source before disconnecting the cables. When disconnecting, remove the black clamp first, then the red clamp.

If servicing a maintainable battery, check the electrolyte levels and add distilled water if necessary.