To transform the unit into an adult-sized full bed, you will need to purchase standard wooden or metal "Full-Size Conversion Rails" designed for LaJobi/Bonavita cribs.
The side panels are not interchangeable. Look for a small sticker reading "L" or "R" on the inside edge.
Bolt the flat tabs of the mattress frame securely onto the mounted brackets. Ensure the flat side of the spring frame faces upward toward the ceiling, while the structural tabs point downward.
Select the height: Use the highest setting for newborns and lower it as the child grows. bonavita sheffield lifestyle crib instructions
Having a second person hold the heavy wooden panels makes assembly much safer and faster.
Which are you planning to set up right now?
Setting up the initial crib requires securing the four main walls to the metal mattress spring support. Step 1: Attach the Left and Right Crib Ends To transform the unit into an adult-sized full
The primary benefit of a lifestyle crib is its adaptability. Here is how to transition the bed through your child's growth stages. 1. Lowering the Mattress Height (Infant Growth)
Before tightening any screws, prepare your workspace and inspect your parts to ensure a smooth, safe assembly process. Essential Tools Needed
Ensure there is no more than a two-finger gap between the mattress and the crib sides to prevent entrapment. Need the Original PDF? Bolt the flat tabs of the mattress frame
Carefully lower the metal spring mattress support frame into the crib chassis.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Before you start assembling the crib, make sure you've unpacked all the components and inspected them for any damage or defects. The Bonavita Sheffield Lifestyle Crib comes with the following parts:
Position the front stationary gate between the left and right end panels. Insert the remaining long bolts through the end panels into the metal inserts of the front gate. Step 4: Final Tightening