Once you've downloaded the MKS Laser Tool setup v1.12.exe file, follow these steps to install the software:
Once you have safely acquired the installer, follow these steps to get the environment ready for your workflow. System Requirements : Windows 7, 8, 10, or 11 (32-bit or 64-bit).
How to Download, Install, and Set Up MKS Laser Tool V1.1.2 (mks_laser_tool_setup_v112.exe)
The open-source community has been instrumental in distributing the tool. For example, the installation file MKSLasertool_setupV1.0.6.zip has been found in enthusiast packages on GitHub designed for flashing FluidNC to MKS DLC32 boards. While "v112" might be a later iteration, the functions generally remain the same.
Connect your laser engraver to your computer via a robust USB Type-C or Type-B cable. Power on the engraver. Open your computer's . Expand the Ports (COM & LPT) dropdown menu. mks laser tool setup v112exe download work work
MKS Laser Tool is a utility software designed for managing laser engraving machines, specifically those using Makerbase MKS DLC32 motherboards. It is primarily used for flashing firmware, configuring Wi-Fi settings, and modifying G-code for improved performance. Download and Installation Official Sources : The latest stable versions are typically hosted on the Makerbase MKS GitHub or manufacturer sites like Version v1.1.2
The most common hurdle is getting the software to actually "talk" to the laser.
Click "Next" through the installation wizard.
Ensure your baud rate is set strictly to 115200 for standard communication, or as designated by your specific firmware document. Once you've downloaded the MKS Laser Tool setup v1
Ultimate Guide to MKS Laser Tool Setup V1.1.2: Download and Troubleshooting
makerbase-mks/MKS-TOOL: MKS TOOL is a tool that ... - GitHub
Open your Windows Device Manager . Under "Ports (COM & LPT)", you should see "USB-SERIAL CH340 (COMx)" without a yellow exclamation mark. 3. Step-by-Step Setup Guide
Once the file is downloaded and drivers are ready, follow these steps: For example, the installation file MKSLasertool_setupV1
Scan the EXE with Windows Defender + Malwarebytes. If it’s under 200 MB and claims to control a laser with no drivers included – suspect risk.
If you are working with an MKS DLC32 motherboard or a similar Makerbase controller for your laser engraver, the is a vital piece of software. Specifically, version V1.1.2 (often searched as mks laser tool setup v112.exe ) is the stable standard for flashing firmware, uploading images via Wi-Fi, and configuring your machine’s settings.
Connect your laser to your PC via a USB/Type-C cable and power it on. In the tool, select the .
: The most reliable way to obtain the tool and the corresponding firmware is from the Makerbase GitHub Repository.