Which (USB, Serial, or Ethernet LAN) are you planning to use? Are you connecting a cash drawer to the printer as well? Share public link
If the printer cover cannot open due to a paper jam:
: If your Linux distribution is not officially supported, you can attempt to use the ESC/POS (Epson Standard Code for Point of Service) command set, which the RP80USE supports. Many Linux POS applications can communicate directly with the printer using ESC/POS commands, bypassing the need for a proprietary driver.
To prevent malware infections or system instability, always source your drivers from official channels. Navigate to the official Rongta Technology Download Center. download rongta rp80use printer driver setup
A: The factory default IP address is 192.168.1.87 . You can also print a self-test page (turn printer off, then press and hold the feed button while powering on) to see its current network configuration.
Once everything is working, you can begin processing receipts, tickets, and other documents with confidence. The Rongta RP80USE is a robust and reliable workhorse that, when properly installed, will serve your business efficiently for years to come.
Once the driver is installed, you may need to configure the communication port based on how your printer is connected (USB, Ethernet, or Serial). These settings are essential for proper data transmission. Which (USB, Serial, or Ethernet LAN) are you planning to use
Extract the Linux driver file ( tar -zxvf rongta-driver.tar.gz ).
One of the printer’s standout features is its connectivity. The RP80USE comes equipped with USB, RS‑232 serial, Ethernet, and Wi‑Fi interfaces, so it can work with just about any POS system, cash register, or computer. It also has a full auto cutter and can control a cash drawer, which makes it a complete point‑of‑sale solution out of the box.
Avoid third-party “driver download” websites. Many contain adware, outdated drivers, or malware. Always download from official or trusted sources. Many Linux POS applications can communicate directly with
When the installer shows “Printer installed successfully” or a similar message, the process is complete. Afterward, it is a good idea to restart the computer so the system finalizes all changes.
: Select the corresponding COM or LPT port and ensure the baud rate matches the printer's internal settings. Testing and Preferences
A: Typically no. The Rongta driver installation generally completes without requiring a reboot. However, if the printer is not detected after installation, a system restart can help finalize the driver setup.
