Videojet 1280 Manual Pdf Install Jun 2026

: Connect the printhead and any optional I/O ports, such as product detectors or encoders, which synchronize the print speed with the conveyor belt. Fluid Loading : Utilize the Videojet Smart Cartridge™

Carefully unpack the shipping crate and inspect all included components before proceeding with the physical installation.

After moving the printer, or every 6 months for stationary installs. Check fluid levels, grounding, and printhead alignment.

Adjust the delay value (in millimeters or milliseconds) to move the printed text horizontally to the desired position on your product. 6. Testing the Jet and Calibrating Alignment

The Videojet Smart Cartridge™ system makes fluid installation simple. videojet 1280 manual pdf install

Operates between 32°F and 122°F (0°C to 50°C) with 0% to 90% RH (non-condensing).

Replace the filter module and the service module. Summary of Safety Warnings

To download the verified , follow these steps:

Digital copies are available on platforms like Scribd for immediate viewing of operator guidelines. : Connect the printhead and any optional I/O

“Never swap blue and green lines. Ink will gel inside the make-up line, requiring full fluid system replacement.”

| Check | Pass/Fail | | :--- | :--- | | Ink and make-up bottles are correctly seated | ______ | | Printhead cable is fully seated (no kinks) | ______ | | Ground resistance <1 ohm from printer to earth | ______ | | Make-up bottle vents open (no vacuum lock) | ______ | | Emergency stop works (pneumatic shutoff, if fitted) | ______ | | Sample prints – 1,000 consecutive without error | ______ |

Operating temperature between 5°C and 45°C (41°F to 113°F) with a non-condensing relative humidity range of 10% to 90%.

Avoid slippage by ensuring consistent mechanical tension on the wheel. Check fluid levels, grounding, and printhead alignment

The best method is to download it from the official Videojet website. Alternatively, you can contact Videojet technical support directly, who can email you the latest PDF version.

Navigate through the user interface () to configure production variables:

Configure print parameters and link the job to a specific line setup.