Bosch Kl 1208 User 39-s Manual Patched Guide

| Feature | Specification | | :--- | :--- | | | 230 V (can also be operated with 220 V) | | Charge Current | 8 A (arithmetic mean) | | Cut-off Voltage | 14.4 V for standard batteries, 13.8 V for maintenance-free batteries | | Battery Compatibility | All 12V lead-acid batteries (e.g., standard, MF) with a capacity of at least 5 Ah | | Dimensions | 236 x 101 x 175 mm | | Weight | Approx. 3 kg | | Work Lamp Bulb | 12V/4W incandescent | | Housing | Impact-resistant plastic with an integrated carry handle and cable storage | | Protection | Double insulation (Class II), thermal cut-out, polarity reversal protection, protected by a standard 30A automotive fuse |

The KL 1208 features an integrated blade fuse (usually 15A) on the front or rear panel to protect against short circuits. Pull the fuse out and inspect the metal filament. Replace it if broken.

Monitor closely; if the charger gets excessively hot, stop immediately. Loose transformer plates. Normal for older units, but ensure it isn't overheating. Fuse blows instantly Reverse polarity. Ensure Red is on (+) and Black is on (-). 5. Maintenance and Care Bosch Kl 1208 User 39-s Manual

Confirms the unit is plugged into the wall and receiving AC power.

Batteries generate hydrogen gas during charging. Always work in a well-ventilated area. No Sparks: Avoid smoking or open flames near the unit. Heat Sensitivity: | Feature | Specification | | :--- |

Connect the to the positive terminal of the battery.

To completely avoid sparking near potential gas emissions, connect the cables while the charger is completely from the AC mains power wall socket. Replace it if broken

Approx. 8A (Arithmetical approx. 5A) Battery Capacity Range: Ideally 20Ah to 80Ah Battery Type: Lead-acid (Standard, Wet/Flooded) 2. Safety Precautions

Ensure both clamps grip the terminals tightly to minimize resistance. 3. Powering On

Store your Bosch KL 1208 in a dry, dust-free environment. Avoid wrapping the heavy copper cables too tightly around the plastic casing to prevent the internal wiring from fraying over time.