Create Guest Network On Xiaomi Mi Router Ax1800 Fixed -

Ensure that the setting enabling guests to see your home computers or shared files is disabled.

Scroll down to the bottom of the page to find the section. Note: If you do not see this section, your router might be running in AP/Mesh mode (see the troubleshooting section below). Toggle the status to Enabled . Fill in the SSID and Encryption Password .

Change the Wi-Fi encryption type. If it is set to WPA3 , change it back to WPA2-PSK (AES) . Many legacy guest devices cannot negotiate WPA3 on Xiaomi guest networks. Alternatively, go to Settings > LAN Settings and ensure your DHCP IP pool has enough available addresses. Fix 3: Firmware Update Resolution

The AX1800 sometimes fails to route Guest VLAN traffic to the WAN DNS. It tries to use the router’s own internal DNS (127.0.0.1), which guests cannot access. create guest network on xiaomi mi router ax1800 fixed

: Enter your administrator password. If you haven't changed it, it may be the same as your main Wi-Fi password. Find Guest Settings (usually at the top) and look for the Guest Network Guest Wi-Fi Configure the Network : Toggle the switch to : Enter a name for the network (e.g., "Guest_WiFi").

: The global version of the Mi Home / Xiaomi Home app sometimes lacks specific plugin toggles if the router's firmware is out of date.

Following these steps ensures that your remains secure while providing convenient internet access to visitors. Ensure that the setting enabling guests to see

To create a guest network on the Xiaomi Mi Router AX1800 Go to product viewer dialog for this item.

The Xiaomi Mi Router AX1800 is an excellent device, but its guest network implementation is sensitive. By switching to , setting manual DNS (8.8.8.8) , using the web interface instead of the App, and ensuring your firmware is up to date, you will eliminate every common failure point.

: Enter the SSID and password, then click Save . 2. Best Practices for Guest Security Toggle the status to Enabled

If you have tried to enable the guest network but it isn't appearing or guests cannot connect, try these fixes:

You close the browser tab. The router’s LED glows steady blue. Outside, the real world still has no firewall.

The AX1800 firmware older than version 1.0.50 had a VLAN leak. Traffic isolation was partially broken.