Huawei Bg2-u01 Test Point !!top!! -

Reinstall the MTK VCOM drivers and restart your PC.

Take your metal tweezers and press one tip firmly against the copper pad.

Huawei MediaPad T3 7 (BG2-U01) utilizes specific test points on its motherboard to trigger EDL (Emergency Download) mode SPD/Spreadtrum Diag mode

: Plastic prying picks, an opening tool, metal tweezers, and a high-quality Micro-USB cable. huawei bg2-u01 test point

: Accessed by holding Volume Up + Power buttons until the Huawei logo appears. This is the standard way to perform a "Wipe Data/Factory Reset" to clear a pattern lock. Hardware & Repair Resources

: To safely open the tablet casing without scratching it.

If you are stuck on a specific part of the process, tell me: What (if any) SP Flash Tool is showing? What operating system your computer runs? Reinstall the MTK VCOM drivers and restart your PC

There are typically two small gold dots located near the battery connector or just above the SIM card slot.

The Huawei BG2-U01 has a removable back cover. Remove the back cover, take out the battery, the SIM card, and the SD card.

Your Huawei BG2-U01 should now boot to the setup screen. : Accessed by holding Volume Up + Power

: Useful for moving to an older version of EMUI to exploit security gaps for unlocking purposes. Safer Alternatives

Using a hardware test point carries inherent risks. Using metal tweezers on a live motherboard can cause a short circuit if you touch the wrong component. Ensure the battery is completely disconnected before touching the test point, and work under good lighting.

Click the button (green arrow) in SP Flash Tool. The software is now waiting for the device to connect.