Resetter Epson L1110

Temporary disable your antivirus software (including Windows Defender) as these utilities are often incorrectly flagged as threats. Launch Utility: Adjustment Program AdjProg.exe ) as an administrator. Selection: and choose your printer model (L1110) and the correct port. Particular Adjustment Mode Counter Reset: Find and select Waste ink pad counter from the list, then click Check the boxes for Main pad counter Platen pad counter to see the current usage percentage. If it's at 100%, click Initialization to reset it to zero. The program will prompt you to turn your printer off. Turn off the printer, click

Ensure your printer is connected to your computer via a USB cable. Disable Antivirus:

: The power and ink/paper lights flash back and forth.

If no resetter software works, you can physically remove the EEPROM chip (IC8 on the mainboard), read it with a CH341A programmer, and change hex values for the waste counters. This is extremely difficult for the average user – stick to the software resetter. resetter epson l1110

If you have reset the printer more than twice, it is highly recommended to buy new sponge pads. Conclusion

Download the RAR file and extract it using software like WinRAR.

: Crucial step, as many security programs falsely flag resetter tools as threats. Particular Adjustment Mode Counter Reset: Find and select

Have you already , or do you need help finding a reliable copy?

Disable firewall/antivirus. Use a different USB port. Restart the printer in “Recovery mode” (hold power + paper button).

: For long-term use, you should eventually replace the physical waste ink pads or install an external waste ink tank to avoid actual ink spills inside your printer. Turn off the printer, click Ensure your printer

Remove the waste ink tank from the back of the printer, wash the sponges thoroughly with water, dry them completely, and reinstall them.

You can buy affordable replacement ink pad blocks online. Opening the back compartment of the L1110 requires removing just one screw.

Locate the "Maintenance" section and select "Waste ink pad counter" , then click OK.