Selmar-turbo-4-battery-charger-instructions

Switch on the outlet. The charger will immediately begin pushing current into the battery cells. Reading the Moving-Arm Ammeter

The Selmar Turbo 4 is explicitly designed for 12V lead-acid batteries . Do not use this charger on NiCad, Lithium-ion (LiFePO4), or small household rechargeable batteries, as doing so can trigger a chemical fire or an explosion.

Because vintage or traditional chargers like the Selmar Turbo 4 lack the automated microprocessors found in modern smart chargers, following the exact operating sequence is critical to prevent battery damage or sparks. Safety Precautions Before You Begin selmar-turbo-4-battery-charger-instructions

Your Selmar Turbo 4 contains a fuse that protects the charger from electrical faults. If the charger shows no signs of operation despite being properly connected:

: Use only with flooded lead-acid batteries; do not use with non-rechargeable or dry-cell batteries. Ventilation Switch on the outlet

Unlike modern digital screens that read "100%" or feature green status LEDs, the classic Selmar Turbo 4 Go to product viewer dialog for this item.

Standard 12V flooded lead-acid, sealed maintenance-free, and calcium car/motorcycle batteries Visual Indicators: Analogue moving-needle Ammeter Do not use this charger on NiCad, Lithium-ion

⚠️ —this indicates a serious problem: