To use the VAG EEPROM Programmer 1.19, you need a compatible K-Line interface cable. The recommended cable is a , often referred to as the "blue" VAG-COM 409.1 cable. It is critical to get a cable that uses a K-Line interface, not a newer or more advanced VCDS (VAS) cable, as these are not suitable for this software's direct hardware communication method. Cables with the FTDI FT232R chip are generally more stable and have better driver support than those with the cheaper CH340 chip .
View and clear fault codes (DTCs), and modify mileage/odometer data (for legal or educational purposes). Software Details & Compatibility Hardware Required:
Choose the module you wish to interact with from the top menu structure. The most common selections are:
If an instrument cluster is damaged and replaced, this software allows technicians to write the original, correct mileage to the replacement cluster to match the vehicle’s actual history. Vag Eeprom Programmer 1.19 Download
) or shared as a zip file (approx. 2.6 MB) on developer communities. Download and unzip the folder containing the VAG_EEPROM_Programmer.exe Interface Setup:
Connect your KKL cable to your computer's USB port and the vehicle’s OBD2 port. Turn the vehicle's ignition to the position (dashboard lights illuminated, but engine off). Step 2: Configure the Software
The Ultimate Guide to VAG EEPROM Programmer 1.19: Features, Usage, and Safe Downloading To use the VAG EEPROM Programmer 1
Go to the or Settings menu within the software and select the matching COM port number you assigned in Device Manager. Step 3: Reading the Instrument Cluster
Change the to an available port between COM1 and COM4 (the software only scans these low-range ports).
Install the appropriate virtual COM port drivers (usually FTDI drivers). Cables with the FTDI FT232R chip are generally
While version 1.19 is excellent, modern alternatives exist:
It can read the 4-digit or 5-digit immobilizer PIN code from the instrument cluster or ECU, which is required for programming new keys.
Right-click the interface, select , and navigate to Port Settings > Advanced .