Cerwin Vega At40 Specs -

Standard spring clips or binding posts (varying by region). Sound Profile and Legacy

If you're hunting for a used pair of AT-40s (typically $150-$300 on the used market), here is what fails.

The is a vintage floor-standing loudspeaker from the "Audio Theater" (AT) series, known for the brand's signature high efficiency and punchy, concert-level bass. Often sought after by collectors of "rock and roll" audio, the

The Cerwin-Vega AT-40 is suitable for a variety of applications, including:

What do you plan to use to power them?

Because these speakers are several decades old, finding a pair on the used market requires a bit of inspection. If you are hunting for a set, keep the following in mind:

The Cerwin-Vega AT-40 Go to product viewer dialog for this item.

's original foam woofer surrounds are prone to dry rot over time and frequently require "re-foaming" to maintain original bass performance.

Old CVs are often criticized for harsh horns and one-note bass. The AT-40 is different: cerwin vega at40 specs

Vocals and instruments are directed to a dedicated midrange driver. Crossover points sit at on the low end and 3,000 Hz on the high end. Keeping the critical vocal range separate from the low-frequency woofer prevents muddying or acoustic intermodulation distortion during intense, heavy bass passages. 3. The High-Frequency Tweeter

Owners of vintage Cerwin-Vega speakers frequently need to replace the foam woofer surrounds

The AT-40's power handling is a critical spec for any potential user. It is rated for 125 watts of continuous (RMS) power, with a peak handling capacity of 250 watts. This high rating means the speakers can be driven to very high volumes without distortion, provided they are paired with a suitable amplifier. However, this spec also means they require a good amount of clean power to perform at their best.

Often includes adjustable midrange and tweeter level controls on the cabinet to tailor the sound to the room. Performance Characteristics Standard spring clips or binding posts (varying by region)

The AT-40 is often sought after by vintage audio collectors looking for a dynamic "party speaker" that can handle high volume levels without compression. Thanks to the 12-inch woofer and 94dB sensitivity, they are well-suited for rock, electronic, and hip-hop genres where bass impact is critical.

The Cerwin-Vega AT40 boasts a sturdy and durable design, with an MDF enclosure that provides a solid foundation for the drivers. The speaker's vinyl laminate finish gives it a sleek and professional appearance, making it a great fit for recording studios and home setups alike. The AT40 features a rear-ported design, which allows for better low-frequency response and reduced bass reflex noise.

With a sensitivity rating of 95 dB (1W/1m), the AT-40 is remarkably efficient. You do not need an expensive, high-end amplifier to drive them. Even a modest 30-watt vintage receiver can push these speakers to room-shaking volumes.

The AT-40 was part of Cerwin-Vega's popular "AT" (Audio Technology) series, well-regarded for offering the brand's signature high-efficiency sound and deep bass in a more home-friendly "bookshelf" style cabinet (though they are large enough to be considered floor-standing by modern standards). Often sought after by collectors of "rock and

The foundation of the AT-40 is its heavy-duty wrapped in the famous, striking red foam surround . The driver features a large motor structure and a lightweight, rigid fiber cone designed to move air quickly. It fires into a tuned rear-facing bass-reflex port, allowing the system to achieve authentic, physical bass extension all the way down to 30 Hz without needing hundreds of watts of amplifier power. 2. Mid-Frequency Cone (5-Inch)