Use a continuity checker to differentiate between the wires. Wiring Connection:
Primary or secondary-current feedback constant-current control, using phase control with a thyristor.
The CY-210B typically works with:
operates primarily as an . It samples and adjusts the welding energy cycle-by-cycle to protect against line voltage drops and thermal fluctuations. Technical Parameter Specification / Capability Control Method
The CY-210B shines with its 5-2 or 5-1-1 programming capability. You can set different temperatures for Weekdays (Mon-Fri) and Weekends (Sat-Sun). weltouch cy-210b manual
Ensure the main power is disconnected before touching any terminal blocks on the rear of the controller.
Calibration (needs 100g weight):
Gradually increasing or decreasing the current to prevent metal splashing or cracking.
A: Modify the address using hardware pins or touchWin’s advanced settings. Use a continuity checker to differentiate between the wires
Supports up to 15 distinct weld schedules that can be programmed directly.