Rak283 Blood Pressure Monitor User Manual -

If the monitor detects an irregular pulse rhythm twice or more during a measurement, the Irregular Heartbeat Symbol (usually depicted as a heart icon with waves) will display alongside your readings. Note: An occasional alert is generally not a cause for concern, but frequent appearances of this icon should be discussed with your physician. Memory Functions: Tracking Your History

When the measurement finishes, the cuff deflates completely. Your systolic pressure, diastolic pressure, and pulse rate will display on the screen. rak283 blood pressure monitor user manual

Insert the cuff’s air plug into the air port on the left side of the monitor. Push firmly until it clicks. If the monitor detects an irregular pulse rhythm

, follow these essential steps to ensure accurate health monitoring. This device typically uses a large LCD screen for clear readings and can store up to 180 measurements (90 per user) for two people. 1. Initial Setup Power Supply 4 AA or AAA batteries Your systolic pressure, diastolic pressure, and pulse rate

: Your systolic pressure, diastolic pressure, and heart rate numbers.

Place the cuff on your bare upper arm. The bottom edge of the cuff should be about 1-2 cm above your elbow joint. Position the air tube in the middle of your arm, aligned with your middle finger.

Open the battery compartment on the bottom of the device. Insert 4 AAA batteries, matching the positive (+) and negative (-) polarities.