The official (executable file). Step-by-Step Serial Flash
Do you have access to a , or are you limited to using a USB drive?
A progress bar will fill up on the screen. Do not touch the remote control or turn off the power. The receiver will automatically reboot once the installation finishes. iclass k9k9 wifi hd pvr software update fix
If you're still experiencing issues with your iClass K9K9 WiFi HD PVR software update, try the following:
Use this when the device won't boot past the logo. The official (executable file)
Operating your receiver on outdated firmware can cause several system instabilities. Updating the software resolves these core issues:
Extract the file if it is compressed. Copy the core update file directly to the root directory of the USB drive (do not put it inside a folder). Step 2: Execute the Firmware Flash Do not touch the remote control or turn off the power
Unzip the archive on your PC. You should see a file ending in a .bin extension. Copy this exact file to the root directory of your formatted USB drive (do not put it inside a folder).
Ensure the file is unzipped and ends in .bin . Confirm the software matches the exact "K9K9 WiFi HD PVR" model. Driver mismatch in the new software.
If your receiver still boots into the main menu but experiences software glitches, missing menus, or WiFi drops, perform a clean local update through the system interface. Step 1: Wipe Existing Cache Data Press the button on your remote control. Navigate to Installation or System Settings . Select Factory Reset (or Default Setting). Enter your system PIN (Default is usually 0000 or 1234 ).
Do not turn off the receiver during the update process. The receiver will restart automatically after the flash is complete. Troubleshooting: iClass K9K9 WiFi Not Working If your WiFi is still not working after the update: