Kercan Barcode Scanner Manual Best

Most Kercan barcode scanners (including wired USB and 2.4GHz wireless models) operate on standard HID (Human Interface Device) drivers. This means they require no special software installation. Wired USB Setup Turn on your computer or point-of-sale (POS) terminal.

Characters are missing, or the output language is scrambled.

Kercan scanners typically support three primary connection modes: USB Wired, 2.4G Wireless (via USB Dongle), and Bluetooth.

| Issue | Solution | |-------------------------------|--------------------------------------------------------------------------| | No power (wireless) | Charge scanner for 2–3 hours | | No beep / LED | Check USB connection or restart device | | Scans incorrect characters | Scan “Factory Reset” barcode, then reconfigure | | Bluetooth not pairing | Remove old pairing from host and re-pair | | Slow or missed scans | Clean scan window, adjust distance, or scan configuration for sensitivity|

Scan any standard barcode. The data should instantly appear where your cursor is blinking. 2.4GHz Wireless Models (with USB Dongle) kercan barcode scanner manual

Issue 3: The scanner won't read specific types of barcodes (e.g., QR codes or UPC-E).

A USB-A to RJ45 cable (for wired models) or a USB charging cable.

If your scanner is behaving unpredictably (e.g., the laser is constantly on, or it isn't reading certain codes), restoring it to its factory default state is often the fastest fix. This process erases all user-defined customizations and reverts the scanner to its original, correct configuration.

By default, most Kercan scanners are programmed to send a "Carriage Return" (the equivalent of hitting the key) after every successful scan. This automatically moves your cursor to the next line in Excel or submits a form in a retail terminal. Changing the Terminator Action Most Kercan barcode scanners (including wired USB and 2

If wireless, ensure the USB receiver is plugged in and the scanner is paired.

Wait 3 to 5 seconds for the operating system to automatically recognize the device.

To maximize the lifespan of your Kercan barcode scanner, follow these basic upkeep rules:

Why is my scanner beep-coding but not typing data onto my computer? Characters are missing, or the output language is scrambled

To enable a specific feature, you must scan a sequence of barcodes from the Kercan User Manual :

Using a Kercan scanner is intuitive. Here is a simple guide to ensure you get the best results:

Try plugging the USB cable into a different port directly on the motherboard, avoiding external USB hubs. The scanner lights up but will not read the barcode.

This manual is for general guidance. Always refer to the specific manual included with your Kercan model for exact configuration barcodes and pairing steps.