Typically VHF/UHF dual-band (specific frequencies vary based on region/programming). Power Output: High/Low power settings available. Channels: Programmable memory channels.
The DXAR8108 radio has the following specifications:
: Press FUNC , then press 7 (R-CDC) . Scroll using arrow keys to choose a standard sub-audible tone (e.g., 67.0 Hz ). Press MENU to save. dxar8108 radio user manual verified
Ensure the antenna and battery connections are dry and clean. Troubleshooting
: Rotate the VOL (Volume) knob clockwise to turn the radio on. You will hear a chirp and see the feature icons briefly on the LCD. Rotate it counter-clockwise until it clicks to power off. The DXAR8108 radio has the following specifications: :
Close and latch the compartment door to maintain the weather seal.
Press once to turn on. Press and hold for two seconds to turn off. Ensure the antenna and battery connections are dry and clean
: Ensure your channel is set to the correct group talk group. Press and hold the PTT button, wait for the short permit tone, and speak clearly into the microphone. Release to listen.
: Includes 22 preset channels with 121 privacy codes to minimize interference. Power Source
A: Your radio is IP57-rated, meaning it can be submerged in up to 1 meter of fresh water for 30 minutes. However, this is only true if the vent hole on the chassis is not punctured and all seals are intact.
with the guides on the back of the radio chassis.