Click and save the file to your computer. Step 3: Document Existing WAN Settings Navigate to the Network or Internet tab. Select WAN > WAN Connection .
Type the default gateway IP address into the address bar and press Enter. For the ZTE F689, this is typically: 192.168.1.1 or 192.168.0.1 Zte F689 Bridge Mode
Plug one end of that Ethernet cable into of the ZTE F689. Click and save the file to your computer
ISP-customized firmware hides advanced options. Solution: Search for the "Super Admin" credentials for your specific ISP. For example: Type the default gateway IP address into the
Since the ZTE is now a bridge, its Wi-Fi serves no purpose and can cause interference.
: Click Apply to save changes. Connect your third-party router’s WAN port to the designated LAN port on the ZTE device and set up the connection (PPPoE or DHCP) on the new router. Potential Roadblocks
Because you disabled DHCP, your computer will not automatically get an IP address from the ZTE device. To log back in later, disconnect the modem from your new router and plug it directly into your PC. Manually change your computer's network adapter settings to use a static IP address (e.g., 192.168.1.50 with a subnet mask of 255.255.255.0 ). You can then load 192.168.1.1 in your browser.