New! | Renolink 1.87 Install Windows 10

: Locate "USB Serial Port" under Ports (COM & LPT) .

The primary hurdle on Windows 10 is the . If the hardware is not recognized, you may need to restart Windows in "Disable Driver Signature Enforcement" mode to allow the specialized FTDI drivers to initialize. Additionally, ensure that your .NET Framework is updated, as Renolink relies on these libraries for its user interface. Conclusion

Complete Guide: Installing Renolink 1.87 on Windows 10 (2026 Updated Guide) Renolink 1.87 Install Windows 10

Ensure the following are installed:

Open (right-click the Windows Start button and select it). : Locate "USB Serial Port" under Ports (COM & LPT)

Windows 10 often assigns high-number COM ports or default latency settings that can cause "No Interface Found" errors. Device Manager : Connect your Renolink interface to a USB port. Open Device Manager and locate "USB Serial Port" under "Ports (COM & LPT)". Set COM Port : Right-click the port, go to Properties > Port Settings > Advanced . Most users recommend setting the port number to Latency Adjustment : Change the Latency Timer (msec) from the default 16 down to

Connect your OBDLINK or Renolink cable to a USB port on your Windows 10 computer. Additionally, ensure that your

Navigate to the tab and click the Advanced button.