You updated the software to a newer VCDS version, which overwrote the clone's custom firmware, bricking it.
Note: Do not connect the interface to your vehicle's OBD-II port or your PC's USB port while the ST-Link programmer is powering the board. Step 3: Clear and Flash the MCU Firmware
Even if it shows errors, try clicking to force the firmware to overwrite the corrupted state. Prevention: Keeping Your Clone Working vcds 2231 hex v2 clone repair verified
Disconnect the cable, restart your PC, and disable your antivirus program.
Method 1: Re-flashing Firmware Using VCI Config (Common Fix) You updated the software to a newer VCDS
Search for a reliable "VCDS 22.3.1 Hex-v2 Clone Repair Kit" (often found on forums like MHH Auto).
After the process, the light should turn blue (or green, depending on the clone type). Prevention: Keeping Your Clone Working Disconnect the cable,
Does the device show any when connected to a car's OBD-II port?
: If the software shows "License Revoked," the cable's internal EEPROM has been flagged.
Click and wait for the verification progress bar to hit 100%. Step 5: Update the Loader and Run Clean Software
that came with your cable (e.g., 22.3.1). Some users have better luck installing the 32-bit version even on 64-bit Windows.