by cycling the main power if the OLP button does not clear the fault.
): Simultaneously press and hold the and OLP buttons on the main console. The display will flash two sets of numbers; note the decimal point position (e.g., "21.12").
The stabilizer leg microswitch indicates the outriggers are not properly extended for the selected lifting chart.
When a code appears on the display, a systematic approach to troubleshooting can minimize downtime. palfingercranemanualerrorcodes
The pages were dense with text, but he found the section quickly. His finger traced the column of numbers until it landed on .
2. Pressure Sensor Faults (E01, E02, or Specific Sensor Codes)
I can provide more targeted troubleshooting steps based on your details. Share public link by cycling the main power if the OLP
: Not strictly a "broken" error, but a code indicating the crane has reached its physical lifting limit.
The numbers will blink sequentially or display a steady code.
Palfinger crane manual error codes serve as the primary diagnostic framework used by operators and technicians to identify, troubleshoot, and resolve system faults across electronic control units like the Paltronic 50 Paltronic 40 The stabilizer leg microswitch indicates the outriggers are
: Turn the system off and back on to see if the fault clears (resets the logic).
The Paltronic 50, a common controller in many Palfinger models, uses a two-part code format (e.g., 01. 00 ). The first part is the main code, and the second provides additional details.
: Codes related to outriggers not being fully deployed or sensors failing to detect ground pressure, preventing the boom from moving. 🛠️ The Troubleshooting Experience
Beyond specific error codes, the Paltronic display uses short abbreviations for general status:
Marked with a star (*), these indicate temporary conditions like an overload. They usually clear automatically once the condition is corrected (e.g., reducing the load).