The first boot after flashing firmware can take up to 10 minutes. Once it boots up, you will be greeted by the initial Android setup wizard, completely free of the old lock screen restriction. Troubleshooting Common Issues
If you are comfortable with this technical approach, you can restore full functionality to your device within roughly 30-45 minutes. To give you the best advice, are you: Stuck on a specific step (like drivers or flashing)?
You may wonder: Is FTF really the best way? Let’s compare.
To recap:
Leave the and Misc panel properties completely at their default factory values.
While holding the button, connect the phone to your PC via a USB cable. The Flashtool log should indicate that the device is connected in Flashmode.
Click on the latest available build release number under the firmware panel, then hit . sony h3113 lock remove ftf
: Ensure these are installed on your PC so the device is recognized in Flashmode. Removal Procedure via Flashtool Prepare the Firmware : Copy your downloaded file into the
Report: Screen Lock Removal for Sony Xperia XA2 (H3113) To remove a forgotten pattern, PIN, or password on a Sony Xperia XA2 (H3113) using the FTF firmware method, you must perform a clean flash using the Sony Mobile Flasher (Flashtool) . Note that this process erases all user data on the device internal storage. 1. Preparation Requirements : A PC running Windows with (version 0.9.18.4 or newer recommended) installed. : Ensure the FlashTool Xperia Driver Pack is installed so the PC recognizes the device in flash mode. Firmware (FTF File)
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. The first boot after flashing firmware can take
Complete Guide to Sony H3113 Lock Removal Using FTF Firmware
Once compilation is finished, copy or move the downloaded .ftf file into the active Flashtool firmware folder, typically located at: C:\Users\YourUsername\.flashTool\firmwares Step 4: Configure Flashtool for Lock Removal