The configuration software ( Diagnostic Tool ) runs best on Windows. WiFi Network Name (SSID) & Password.
The Xprinter XP-420B requires a configuration utility tool to inject your Wi-Fi credentials into the printer hardware. 1. Download and Open the Diagnostic Tool xprinter xp420b wifi setup
Look at the printed label under the Network section. The should say Connected or Link Up , and it will display an IP Address (e.g., 192.168.1.150 ). 3. Installing Printer Drivers for Wireless Printing The configuration software ( Diagnostic Tool ) runs
Click "Get Status". The light should turn green, indicating the tool is communicating with the printer 1.2.2. WiFi Settings: Navigate to the "Network" or "WIFI" tab. Configure Network: SSID: Enter your WiFi network name. Password: Enter your WiFi password. Encryption: Select the encryption type (usually WPA2-PSK). xprinter xp420b wifi setup
If you want to tailor this setup to your specific environment, let me know:
If the setup software doesn't show "WLAN/WiFi", your model might not have a WiFi module, or you may need to check the USB-based configuration steps.
: Choose Select Software and look for "Xprinter 4-inch" or select Generic PostScript / Label Printer if the specific driver is not installed. Click Add to complete the setup. 6. Printing from Mobile Devices (iOS & Android)