The module is commonly wired through a 4-wire SPI interface and includes two configurable digital output pins for hardware interrupts or status monitoring. device.report Pin Number Description Ground connection. Supply voltage: 1.8V to 3.6V . (Exceeding 3.6V will damage the module).
Ground reference. Connects directly to the system power ground. VCC e07-m1101d pinout
When looking at the module from the (the side with the components and the "Ebyte" logo), the pins are typically numbered as follows: Pin Number Description 1 VCC Supply voltage (1.8V – 3.6V). Do not use 5V. 2 GND Common ground. 3 GD00 Digital I/O General purpose I/O pin (often used for data/sync). 4 CSN Chip Select (Active Low). 5 SCK Serial Clock input. 6 MOSI SPI Data In Master Out Slave In. 7 MISO SPI Data Out Master In Slave Out (GD01). 8 GD02 Digital I/O General purpose I/O pin (often used for interrupts). The module is commonly wired through a 4-wire
void loop() // Your code here (e.g., send or receive data) (Exceeding 3
Standard SPI interface for communication.
chip. It typically features an 8-pin (2x4) DIP package with a 2.54mm pitch, making it compatible with standard breadboards and prototyping. E07-M1101D Pinout Definition