Using a USB cable, connect the Andromax M3Y to your Windows computer. Make sure to use a data-capable USB cable, not just a charging cable.
Insert a non-Smartfren SIM card (e.g., Telkomsel or XL) into the slot.
Do not touch the device. The MiFi will automatically reboot once the firmware installation is complete. Method 2: Qualcomm Flash Image Loader (QFIL) Method Firmware Andromax M3y Unlock
: A high-quality micro-USB cable (use the original cable if possible).
Click "Load XML" and select rawprogram0.xml followed by patch0.xml . Using a USB cable, connect the Andromax M3Y
: Ensure the battery is charged to at least 70%.
: If Device Manager shows an error or an unknown device, reinstall the Qualcomm drivers and restart your computer. Try switching to a different USB port (preferably a USB 2.0 port). Do not touch the device
Since this usually refers to flashing a Smartfren Andromax M3Y device to remove carrier locks or update the operating system, this review is written from the perspective of a tech enthusiast reviewing the firmware file and the process.
Note: The Andromax M3y (often labeled as the Andromax C3y or M3y by the Indonesian brand Smartfren) is a 4G LTE entry-level smartphone. This guide focuses on unlocking the device for carrier freedom or bypassing a forgotten pattern/FRP lock using official firmware.
Power off the MiFi. Hold the WPS button while connecting it to the PC via USB cable to enter EDL mode. Your PC device manager should recognize it as Qualcomm HS-USB QDLoader 9008 .