Loading…
0–20 mA or 4–20 mA for external recording.
: Unscrew the top brass cap of the measuring cell.
If you require specific assistance with your device, tell me: deckma omd11 manual
The general process for configuring the alarms is as follows:
Operating the OMD-11 requires following structured startup and shutdown checklists to maximize system longevity. Pre-Operation Checks 0–20 mA or 4–20 mA for external recording
When the OMD-11 experiences an operational issue, the "System Fault" LED illuminates, and the alarm relays trip safely into an alarm state. Common Fault Scenarios Issue / Error Symptom Potential Cause Corrective Action Heavily fouled glass tube or trapped air bubbles.
Always flush the instrument with clean water for at least 5 minutes before shutting down. This prevents oil deposits from drying on the glass tube. 5. Maintenance and Cleaning Protocols This prevents oil deposits from drying on the glass tube
: Proper grounding is critical, especially when operating at high voltages, to prevent interference and ensure safety. OMD-11 Oil-in-Water Monitor Manual | PDF | Relay - Scribd