Kc89c72 Datasheet Fix (2026)

: Signal levels can be controlled directly by a processor or via an internal envelope generator.

| Pin | Name | Type | Description | |-----|----------|--------|--------------------------------------------------| | 1 | DA7 | I/O | Data bus bit 7 | | 2 | DA6 | I/O | Data bus bit 6 | | 3 | DA5 | I/O | Data bus bit 5 | | 4 | DA4 | I/O | Data bus bit 4 | | 5 | DA3 | I/O | Data bus bit 3 | | 6 | DA2 | I/O | Data bus bit 2 | | 7 | DA1 | I/O | Data bus bit 1 | | 8 | DA0 | I/O | Data bus bit 0 | | 9 | /BDIR | Input | Bus direction control (mode select) | | 10 | /BC2 | Input | Bus control 2 | | 11 | /BC1 | Input | Bus control 1 | | 12 | /RESET | Input | Active low reset | | 13 | A8 | Output | I/O port A bit 8 | | 14 | A7 | Output | I/O port A bit 7 | | 15 | A6 | Output | I/O port A bit 6 | | 16 | A5 | Output | I/O port A bit 5 | | 17 | A4 | Output | I/O port A bit 4 | | 18 | A3 | Output | I/O port A bit 3 | | 19 | A2 | Output | I/O port A bit 2 | | 20 | A1 | Output | I/O port A bit 1 | | 21 | GND | Power | Ground (0V) | | 22 | A0 | Output | I/O port A bit 0 | | 23 | B0 | I/O | I/O port B bit 0 | | 24 | B1 | I/O | I/O port B bit 1 | | 25 | B2 | I/O | I/O port B bit 2 | | 26 | B3 | I/O | I/O port B bit 3 | | 27 | B4 | I/O | I/O port B bit 4 | | 28 | B5 | I/O | I/O port B bit 5 | | 29 | B6 | I/O | I/O port B bit 6 | | 30 | B7 | I/O | I/O port B bit 7 | | 31 | NC | - | Not connected (No Connection) | | 32 | NC | - | Not connected | | 33 | ANOD | Output | Analog output – channel A (audio out) | | 34 | ANOD | Output | Analog output – channel A (same as pin 33) | | 35 | BNOD | Output | Analog output – channel B | | 36 | CNOD | Output | Analog output – channel C | | 37 | TEST1 | Input | Factory test – tie to GND | | 38 | TEST2 | Input | Factory test – tie to GND | | 39 | CLOCK | Input | Master clock input (typical 1–2 MHz) | | 40 | VCC | Power | +5V DC |

Unlike general-purpose microcontrollers, the KC89C72 is a dedicated logic chip. Its primary purpose is to interface the host CPU (usually an x86 architecture) with floppy disk drives, handling the complex timing requirements of data encoding, error checking (CRC), and motor control without burdening the main processor. kc89c72 datasheet

Disclaimer: The KC89C72 is an obsolete component. This article aggregates publicly available information from community sources. Users are advised to handle electronic components responsibly and verify compatibility for their specific applications.

Tie the three analog channels together for a mono mix, or separate them into left, center, and right channels for stereo sound. : Signal levels can be controlled directly by

Active-low input that clears all internal registers to zero. VCC / VSS: +5V Power supply and Ground pins. The 16 Control Registers

Simply put, the . It was manufactured by a company named FILE (or FILFACT) and is marked with a "file" logo. Disclaimer: The KC89C72 is an obsolete component

When integrating the KC89C72, engineers should prioritize the following: Power Supply