Kess V2 Tutorial !link! Direct

Once finished, the software will say "Task Completed." Turn the ignition off, wait 30 seconds, then start the engine to verify the flash. Troubleshooting Common Errors

Your Kess V2 bench harness has colored alligator clips.

Note: If the tool uses Virtual Reading, it will download the matching factory file from the Alientech cloud server based on your ID numbers. kess v2 tutorial

Once inside KSuite, you must correctly map the vehicle to its specific protocol.

Plug the KESS V2 OBD cable into the vehicle’s OBD-II port (usually located under the steering column). Once finished, the software will say "Task Completed

The primary function of the KESS v2 is to safely extract the original map file from a vehicle and upload a modified version.

Reading the original factory file is the first step in any tuning process. Vehicle Selection Once inside KSuite, you must correctly map the

Unlike bench or boot-mode tools, KESS mostly works via the vehicle's cabin diagnostic port without removing the ECU. 2. Hardware and Software Setup