: The standard cable is the TSX17ACC8 , which connects the PLC's "Console" port (RS-485) to a PC.
Schneider Electric (the successor to Telemecanique) has long since moved on to . There is no direct "Windows 11" version of PL7-2. If you are stuck, your options are:
A vintage engineering laptop running MS-DOS 6.22, Windows 95, or Windows 98 (in MS-DOS mode).
Given the extreme difficulty of supporting PL707, many facilities choose to from the TSX 17. If you are searching for "Telemecanique TSX 17 programming software" because you inherited a dead machine, consider these modern alternatives:
: Install the latest stable version of DOSBox (free, open-source). telemecanique tsx 17 programming software
: Running a 32-bit version of Windows XP or a pure MS-DOS VM can sometimes be more stable for timing-sensitive serial communications. 4. Alternative: The TSX T317 Handheld Terminal
For a more stable, production-grade environment, configure a virtual machine running a native 16-bit/32-bit operating system.
Ensure your DOS environment is mapped to the correct physical COM port (usually COM1 or COM2).
To configure the PLC, follow these steps: : The standard cable is the TSX17ACC8 ,
Check Device Manager for the virtual COM port number. Update your DOSBox configuration file ( dosbox.conf ) to map that exact COM port.
A computer with a true RS232 COM port is ideal. Using USB-to-serial adapters often fails with DOS software due to timing issues. Operating System: Windows 95, 98, or raw DOS. Challenges with Modern PCs
: The official RS232-to-TTY current loop serial cable.
: Required for TSX 17-20 models, typically if a specific PL7-2 software cartridge is plugged into the front. This allows for Ladder (LD) and Grafcet (SFC) programming. If you are stuck, your options are: A
Your original program uses memory overlays or an extended memory manager (EMM386). In DOSBox or a VM, you need to adjust the memory configuration. Old PL707 uses "Conventional Memory" (first 640KB). Load HIMEM.SYS and EMM386.EXE with the RAM parameter.
The TSX 17 series comprises micro-PLCs (TSX 17-10, TSX 17-20) that required specific DOS-based software for programming.
Designed strictly for the entry-level TSX 17-10 blocks.