Xinje - Plc Program Tool 3.7

Analog expansion cards convert continuous electrical signals (0-10V or 4-20mA) into raw digital integers inside the PLC, usually ranging from 0 to 4095 or 0 to 16383 .

To establish a connection between the tool and a physical PLC, follow these general steps: Physical Connection : Connect the PLC to your PC using a dedicated Xinje serial programming cable or an RS232-USB converter. Software Configuration : In the Program Tool, navigate to [Option] > [Software Serial Port Config] to select the correct COM port. Verification : A red prompt stating "Connect To PLC Succeeded" confirms a successful link. 维控科技 Supported Hardware Families

X0 (Start) X1 (Stop) Y0 (Motor) ---| |------------|/|--------------( )--- | | Y0 (Latch) | ---| |-----------+ Use code with caution. Xinje Plc Program Tool 3.7

Open the software and navigate to > Software Serial Port Config .

Connect your PC to the PLC using the appropriate programming cable (typically a specialized USB or RS232 cable). Verification : A red prompt stating "Connect To

Below is a structured overview of the tool's features, setup, and core operations.

The "Deep" value of the 3.7 environment is most visible in its diagnostic layer. Testing code without physical hardware is a necessity in modern development. Connect your PC to the PLC using the

: Slim, ultra-thin controllers designed for compact spaces with high cost-performance.

Are you integrating this PLC with a specific ?

The V3.7 version introduces significant enhancements, particularly in programming flexibility and language support:

XDPPro is the integrated development environment (IDE) for Xinje's XD, XL, XG, XK, XE, and RC series PLCs. It serves as the primary interface for writing, debugging, and managing control logic, offering tools to transform project requirements into executable PLC code. This allows engineers to design complex automation systems using a PC, then download and test the code on a physical controller.