Onkyo Rc-799m Remote Manual !!top!! -

Degrading battery voltage or dirty internal carbon contacts.

) & Enter: Navigates through on-screen menus and confirms selections.

If the remote is acting erratically, or if you want to wipe out all custom device programming to start fresh, you can perform a hard reset. Press and hold the button. onkyo rc-799m remote manual

To switch between these modes, simply press the corresponding button as indicated:

You cannot find the original paper manual? Here is how to get the RC-799M talking to your receiver. Degrading battery voltage or dirty internal carbon contacts

Open the back. If you see white or green crusty residue, clean it with a q-tip dipped in white vinegar, then dry it thoroughly. Insert . The red LED at the top should flash once.

If your RC-799M is physically broken (dropped, cracked board), do not pay $80 for a used one on eBay. Instead, buy a universal remote like the (discontinued but available used) or a SofaBaton U2 . Press and hold the button

The RC-799M features dedicated buttons to control audio in other rooms without walking over to the physical receiver panel. Turning On Secondary Zones

The remote itself is simple to use. It is designed to handle the core functions of an Onkyo receiver, including power on/off, volume and mute control, input selection, listening mode adjustment, and the most commonly used media playback and tuner functions.

Despite the above, some versions of the RC-799M have been reported to come pre-programmed with up to 4 different code sets to switch between different device types. This is a full programming feature but rather a way to select a different pre-set configuration.

Hold both buttons for approximately 3 seconds until the remote's indicator light turns on solid. Release both buttons.