Ch-899 Chouchin Radio Controlled Clock Manual

To get your clock running with atomic accuracy, follow these steps:

The hands will move rapidly and typically stop exactly at 4:00, 8:00, or 12:00. This is normal.

The clock is trying to find its home position (12:00) or is actively fast-forwarding to catch up to a received signal.

Lost the Paper? Here’s Your Guide to the CH-899 Chouchin Radio Controlled Clock Manual ch-899 chouchin radio controlled clock manual

Remove the battery for at least 1 minute. Some models have two pins in the upper-left corner that can be short-circuited with a screwdriver to clear the memory. MSF Radio Controlled Wall Clock - TLC Electrical Supplies

Use a dry, soft microfiber cloth to clean the exterior casing. Never use liquid cleaners or abrasive chemical sprays on the movement housing.

If the hands spin indefinitely, the clock is searching for a signal. Allow it to run for up to 24 hours. Incorrect Time Shown To get your clock running with atomic accuracy,

If successful, the tower icon will stop flashing and remain on the screen. The exact time will appear. 2.3. Manual Time Setting

Replace the battery with a fresh alkaline battery. Even if the hands move, the receiver may not have enough power to function.

Once powered, the hands will rapidly advance to the 12:00 position and stop. The clock will then search for a signal, which can take anywhere from a few minutes to several hours (and sometimes overnight). Manual Time Setting Lost the Paper

Allows setting the correct time zone (e.g., P=Pacific, M=Mountain, C=Central, E=Eastern). 4. Manual Setting Instructions

Once the battery is inserted, the clock hands will automatically begin to spin. Step 2: Auto-Positioning