Click the icon (indicated by a drill bit pointing down). In the input mask, fill out the position variables: X and Y : Center point coordinates of the hole.
How deep the drill penetrates. If drilling completely through, add 1-2mm to the material thickness (e.g., D + 1 ) to ensure a clean cut. Select the drill diameter from your tool database. Horizontal Drilling (Edge Boring) Used frequently for dowel joints on the edges of panels. Click the Horizontal Drilling icon. Select the processing face: Front, Back, Left, or Right .
WoodWOP 5.0 remains a foundational CNC programming software widely used across the woodworking industry, particularly for HOMAG and Weeke CNC machines. It utilizes a graphical user interface to generate WoodWOP (MPR) programs, allowing operators to program machining steps like routing, drilling, and sawing without needing to write raw G-code.
We need to tell the spindle which tool to grab. Let's assume Tool #5 is a 5mm drill bit.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. woodwop 5.0 tutorial
Hit Simulate. You should see the green drill bit plunge precisely where you intended.
Set the speed at which the tool moves through the wood.
Click on the icon and link it to the contour you just drew.
If you work in the woodworking industry, specifically with CNC machining centers (such as Weeke, BMG, or KAL), you have likely heard of WoodWOP . As of its 5.0 iteration, this software has become the gold standard for programming nesting, drilling, and routing operations. Click the icon (indicated by a drill bit pointing down)
Link the operation to your newly created contour by selecting its ID from the drop-down menu.
: A practical walkthrough for programming parametric cabinet doors using the version 5 interface.
: Choose the correct cutter from your tool database (e.g., a 16mm diamond bit).
Start using variables (e.g., L, W, T) for dimensions rather than hard numbers. This allows you to change the size of the piece later without rewriting the program. If drilling completely through, add 1-2mm to the
Set the total cutting depth. You can use positive or negative values depending on your machine settings (typically relative to the surface or table).
Shows the sequence of operations applied to the piece.
WoodWOP 5.0 remains one of the most reliable and widely used workshop-oriented programming (WOP) systems for Homag and Weeke CNC machines. Designed specifically for the woodworking industry, it allows operators to create complex machining programs using graphical representations rather than raw G-code.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.