Up to 30 meters (approximately 100 feet) in open areas Power Supply: 2 x AAA Batteries (1.5V) Modulation Method: GFSK
If you want to move a light to a different zone, or if the remote is glitching, you will need to clear the existing pairing code.
Your ZH17 remote controller must be linked to your light fixture before it can operate. Follow these steps to pair them: smart light remote controller zh17 manual
Setup & installation tips (from interpreting manual)
Most ZH17 remotes come paired from the factory, but if yours isn't responding, follow these steps to link it: Power Cycle Up to 30 meters (approximately 100 feet) in
Your remote will not control any fixture until it is explicitly paired. Follow these exact steps to link a light to a specific zone:
The ZH17 typically requires two AAA batteries. Replace them with fresh alkaline batteries and ensure the polarity (+/-) is correct. Follow these exact steps to link a light
Pairing the ZH17 remote to .
The most common issue users face is a remote that refuses to control the light. This happens because the remote must be "coded" or paired to the light receiver first. Follow these exact steps to link your device:
What is the you are using? What specific button or feature is not working?
Turn off the light fixture via the main wall switch for 10 seconds. Turn the wall switch back on.