Do not click buttons or modify voltage settings unless you are following a specific service manual directive. To help tailor further information, tell me:
Disconnect all other USB printing devices from the computer.
Forces ink through the lines after replacing parts or extended storage. Dx100 Service Program 1.7.0 Download
The diagnostic terminal beeped cheerfully. CALIBRATION MODE: AUTONOMOUS.
Use this function only if you notice severe color drops that standard cleaning cycles cannot fix. Open the menu within the utility. Select Initial Ink Charge or Strong Cleaning . Ensure all ink cartridges have at least 50% capacity. Do not click buttons or modify voltage settings
Which are you currently running?
After launching the program, look for a “Firmware Update” or “File Open” option. Select the firmware file (usually a .fw or .bin file supplied by Fujifilm), then follow the on‑screen instructions. Do not turn off the printer until the update is complete. The diagnostic terminal beeped cheerfully
Open the maintenance hatch, remove the saturated waste pads, and install a fresh OEM pad set.