New!: Hyt Tc-320 Programming Software

Connect the programming cable to your PC’s USB port and the mini-USB port on the side of the HYT TC-320.

Download and extract the HYT TC-320 programming software setup files. Run the setup.exe file as an administrator.

:

The LED indicators will show the progress. This method is efficient for setting up a fleet of radios. hyt tc-320 programming software

Adjusts the threshold for filtering out background static. A setting of 3 to 5 is recommended for most environments.

The TC-320 is a plug-and-play device via its Mini-USB port. However, the specific programming drivers allow your PC to enter "PC Programming Mode". Ensure you install these before you plug in the radio for the first time.

Ensure you have the legal right or FCC/local authority license to broadcast on the frequencies you program into the device. Operating on restricted public safety, corporate, or military frequencies without authorization is illegal. Connect the programming cable to your PC’s USB

: The TC-320 uses a mini-USB port for both charging and programming.

Set channels to High Power (2 Watts) for maximum range or Low Power (0.5 Watts) to save battery life. Optional Features and Function Keys

成功完成软硬件安装与设置后，即可正式开始编程。 : The LED indicators will show the progress

Now that software and drivers are ready, follow these steps precisely.

A: 官方指定使用的是 Hytera PC30 USB编程线缆 。该线缆一端为USB-A接口，另一端为 Mini USB 接口，连接至TC-320机身。

The HYT TC-320 programming software requires a computer with specific specifications, including: