: Improved support for modern dbx Zone Controllers used in commercial installations.
If the updater cannot find the device, double-check your COM port settings and ensure your USB-to-Serial drivers are fully installed.
: If you are using Windows 10, some users have reported the updater works better when run in compatibility mode for Windows 7. DriveRack 260 Updater v1.60 (Windows) - DBX
A: Your anti-virus (especially McAfee or Norton) may have quarantined the .exe stub. Add an exception for your download folder and re-download the file. driverack 260 updater v161 updated
As manufacturing of the DriveRack 260 progressed, dbx updated the microcontrollers (MCUs) inside the unit. Newer manufactured units come with updated hardware that requires firmware version 1.61. Conversely, older legacy units rely on version 1.60.
A: Yes. The "M" version uses identical DSP firmware. However, the front panel LEDs will not change behavior.
By updating to the v1.61 software, Driverack 260 users can take advantage of the latest features and improvements, ensuring optimal performance and sound quality in their audio applications. : Improved support for modern dbx Zone Controllers
Launch the downloaded dbx 260 Updater executable file ( v1.610 ).
Power cycle the DriveRack while holding down the PREV PG button until the screen says "WAITING FOR FLASH DOWNLOAD".
: Fixed bugs that caused the DriveWare GUI to disconnect during live tuning. Pro-Tip for the Process DriveRack 260 Updater v1
requires a Windows computer and a stable connection between the computer and the unit. Prerequisites The updater is designed for Windows OS. Serial Cable/Converter: The DriveRack 260
This happens when the updater cannot communicate with your USB adapter. Open Device Manager, right-click your serial adapter, and select . If the error persists, manually change the port number to a low digit (like COM1 or COM2) within the advanced port properties. Frozen Progress Bar
Note the COM port number assigned to your serial adapter (e.g., COM3). If it is higher than COM4, right-click the device, go to Properties > Port Settings > Advanced, and change it to an open port between COM1 and COM4. Step 4: Run the Flash Updater
Watch the LCD display closely immediately upon startup. The firmware version (e.g., "1.5", "1.60", or "1.61") will appear briefly. How to Perform the DriveRack 260 Update (v1.6.1) Updating the DriveRack 260
Click the "Update" button. A progress bar will track the firmware installation. Do not disconnect power or the cable during this phase.