Cencom Gold Wiring Diagram [2021] Jun 2026

This section breaks down the core connections of your CenCom Gold. The specific wiring diagram will vary based on the exact model year and optional equipment.

Always connect the main ground wire directly to the negative (-) battery post to ensure a clean electrical connection and avoid siren interference. cencom gold wiring diagram

The unit requires a negative ground system. Use two 10 AWG red wires fused at 40 Amps each to ensure the system can handle the high-current demands of sirens and multiple light heads. This section breaks down the core connections of

| Pin | Wire Color | Function | Vehicle Connection | | :--- | :--- | :--- | :--- | | 1 | | +12V Constant (Battery) | Thick constant power at ignition harness | | 2 | Red / White | +12V Constant (2nd feed) | Same as Pin 1 (for high current) | | 3 | Pink | Ignition 1 Output | Vehicle Ignition wire | | 4 | Orange | Accessory Output | Vehicle Accessory wire (radio, wipers) | | 5 | Yellow | Starter Output | Vehicle Starter wire | | 6 | Brown | Ignition 2 / Heater Output | Second ignition (or not used) | | 7 | Black | Chassis Ground | Solid metal under dash | | 8 | Blue | Brake Shutdown Input | Brake pedal switch (+12v when pressed) | | 9 | Gray | Hood Pin Input (-) | Hood pin switch (safety shutoff) | | 10 | White | Parking Light Output | Vehicle parking light wire | The unit requires a negative ground system

Wire lights and sirens to the designated output harness. Ensure wires are properly shielded and secured.

18;write_to_target_document1b;_WUPuaYjFBdrt7_UPm__luQE_100;57; 0;98f;0;61d; 0;26c;0;7fe; 0;fa4;0;28d5; Whelen CenCom Gold Siren and Light Control System CCSRN2

The CenCom Gold is designed for simplicity in installation while offering complex functionality. The main components include: