Go to the hardware configuration window and verify the dropdown is locked onto .

Your preferred (e.g., CorelDRAW, ArtCut, or Adobe Illustrator)

has an onboard memory buffer that can easily overload on complex vector shapes. If cutting intricate designs, increase the buffer delay inside your software parameters or swap from a native USB line to a premium physical equipped with a native serial PCIe expansion card. If youg., Windows 10, Windows 11, or macOS)

Getting your Jinka 1351 to work requires a shift in mindset. Instead of searching for a specific Windows driver file, . Your most likely path to success is:

- If you are looking for advanced software functionality for your XE-1351, this provides software plugins. Important Notes:

Step 3.3: Install the Cutting Software Driver (CorelDRAW / ArtCut)

This guide provides and walks you through the entire installation process step by step.

Locate the setup.exe file inside the extracted folder and double-click to run it.

Before hunting down files, it's worth noting that Windows can sometimes handle the core USB driver on its own. As noted in a Microsoft Q&A, if you restart your computer with the plotter plugged in, Windows will often attempt to install a basic driver automatically. It's always best to check this first.

Change the COM port number to a low number (e.g., ) to ensure compatibility with older design software. Click OK, then OK again. Troubleshooting Common Jinka 1351 Driver Issues

If it has a yellow warning symbol, right-click it and choose using the folder you extracted earlier. 4. Setting Up the Plotter in Software

The required driver depends on your specific model series and whether you need contour cutting capabilities: Jinka XL Pro 1351 (Only Cut)